ADOS All Purpose Resin Jerry Can 16L

4:1 Fibreglassing Resin System

ADOS All Purpose Resin is a sheathing and laminating
resin designed for extreme durability in both marine and general
applications. It is used by the professionals for guaranteed
results.

ADOS All Purpose Resin’s low mixed viscosity ensures
good penetration and provides superior wet out and cured
characteristics at ambient temperatures. It has excellent bonding
and barrier coating properties. It is especially suited for use
with fibreglass cloth in the surface protection of timber in marine
situations. No thinning required.

ADOS All Purpose Resin creates a tough, stable base for
paints and varnishes. It is formulated without volatile solvents,
has no strong solvent odour, has a relatively high flash point and
does not shrink after curing.

ADOS All Purpose Resin can be thickened with micro
balloons to bridge gaps and voids, and can be sanded and shaped
when cured.

Features and Benefits

• Extremely durable
• Good penetration
• Superior wet out
• High strength
• Moisture resistant
• Excellent bonding and barrier coating properties
• Creates a tough, stable base for paints and varnishes
• No volatile solvents, no strong solvent odour
• Does not shrink after curing
• Bonds to many surfaces – wood fibre, fibreglass, reinforcing
  fabrics, foam, a variety of metals
• Bridges gaps and fills voids
• Can be sanded and shaped when cured

Uses

• Boat building
• Waterproofing
• Automotive repairs
• Building projects
• Decking
• With fibreglass cloth as the moisture barrier on wooden boat
  hulls
• Use ‘neat’ as an osmosis barrier coating on most boat
  hulls

Specifications:

Typical Properties and Characteristics

Pot Life	A 100g mass will gel (polymerise) within twenty minutes @ 25 degreesC. Initial cure is overnight to a sandable state but full cure is not attained for three to seven days.
Coverage	Approximately 2.25m per litre of mixed CRC All Purpose Resin when using 200g glass cloth. Approximately 3-3.5m per litre of mixed resin when applied ‘neat’.