ADOS F92 Air Driven Spray Contact Adhesive

General Purpose Sprayable Adhesive

ADOS F92 is formulated to offer very controlled spraying with
air driven spray equipment. It is a low viscosity product which
gives a fine glue line.

When sprayed it generates virtually no mist which means the
product is applied directly to the surface and there is no airborne
waste and very little vapour. This gives greater coverage and
economy, less odour and an improved work environment – all
important factors for commercial applicators.

It has exceptional performance, superior bond strength and will
bond most materials to each other or other substrates.

Features and Benefits

• Spray grade – Formulated for optimum performance with air
  driven spraying
• Fine glue line – Enhances finished product appearance
• Low misting formula – Greater economy, less product waste
• Minimum odour, less vapour – Greater safety
• Colour (Red) – Greater visibility of coverage
• Colour (Clear) – Ideal for seam joints

Uses

• It has exceptional performance for making bonds with:
  Polyurethane foam – metals – ceiling tiles – veneer – bench top –
  laminates – plasterboard – concrete – fibreglass – particle boards
  – timber – carpets – cork – plastics – cardboard – fabrics –
  leather – weather seals – some cloth backed vinyls – sound
  deadening and thermal insulation materials – PVC skirting – butyl
  rubber roofing – commercial grade vinyl floorings – some
  rubbers

Specifications:

Typical Properties and Characteristics

Type	Contact solvent-based
Composition	Polychloroprene (Neoprene)
Colour	Clear or red
Temperature Range	93 degreesC
Reactivation	Hear or solvent
Viscosity	130 plus or minus 20 cps @ 25 degreesC
Coverage	4 – 8m2 per litre bond area
Working Time	15-60 minutes
Thinning	No thinning is required
Clean Up	ADOS Solvent N