ADOS MS Adhesive Sealant Black 400g

High performance adhesive sealant

The ADOS MS Adhesive Sealant Black is a high
performance, one-component neutral curing adhesive sealant based on
MS Polymers. It has excellent primerless adhesion to all materials
commonly used in the demanding building, construction and
engineering industries. It is ideal where silicone sealants are not
suitable.

It’s formulated for durable bonding, sealing and waterproofing gaps
in dilation joints. This innovative product cures quickly in
ambient temperatures and retains excellent bond strength,
elasticity and tear resistance over the years. It skins over in a
short time resisting dust and dirt pickup and can be applied in
thick layers without shrinking or bubbling.

ADOS MS Adhesive Sealant Black will not stain and
is compatible with commonly used paint systems. It will not crack
or show signs of aging when exposed to adverse weather conditions
and harsh UV radiation. It does not contain solvents, isocyanates
and silicones.

ADOS MS Adhesive Sealant Black Features:

• Excellent adhesion strength
• Waterproofs, bonds and seals
• Paintable – Cured product can be painted with most solvent and
  water based paints and varnishes
• Neutral cure – Contains no acids
• Extreme flexibility
• Will not crack – No cracks and no signs of aging
• Interior and exterior use
• Low VOC, low odour
• UV resistant
• Excellent bond strength, tear resistance and elasticity is
  maintained over time, even years after application
• Non-slump – Suitable for vertical joints
• Extreme low shrinkage – Less than 1%, allows application in
  thick layers
• Non-bubbling
• Non-staining
• Primerless one-component product
• Cures fast
• Skins over in a short time – To resist dirt and dust
  pickup
• Easy handling – Can be extruded from cartridges with a low
  force even in low temperatures
• Totally chemically neutral
• Good chemical resistance
• Easy clean up
• Use on most substrates – PVC, concrete, brick, timber, glass,
  aluminium, iron, stainless, mild or galvanised steel, copper,
  brass, zinc, ceramic, plywood, masonry, cement plaster systems,
  many of the newly developed materials for construction, fiberglass,
  various plastics

ADOS MS Adhesive Sealant Black Specifications:
Physical Properties (uncured product)

• Type: Adhesive sealant
• Composition: MS polymer
• Curing mechanism: Moisture curing – Non-acid
• Colour: Available in white, clear, black, grey
• Odour: None
• VOC: Low
• Viscosity: Paste
• Specific gravity: 1460 plus or minus 10
  kg/m³
• Skin formation time (23 °C / 50% rel. humidity): 20-30
  minutes
• Cure time (23 °sC / 50% rel. humidity: 2-3 mm/day
• Application temperature: 5 °C to 30 °C

Physical Properties (cured product)

• Hardness Shore A (ISO 868): 15-20
• Change in volume (ISO 10563): < 1%
• Tensile strength (ISO 8339): 0.40-0.60 MPa
• Module E 100% (ISO 8339): 0.20-0.30 MPa
• Elongation at break (ISO 8339): 600-700%
• Tensile Strength (ISO 37 rod 1): 1.00-1.40 MPa
• Elongation at break (ISO 37 rod ): 500-700%
• Service temperature: -40 °C to +90 °C
• Maximum joint depth: 20 mm
• Maximum joint width: 20 mm
• Good chemical resistance: To water, mild solvents, mineral
  oils, fat, low concentration anorganic acids and bases