ADOS PVC Pipe Cement 75ml

Ideal for repairing pipes in both pressure and non-pressure applications

The ADOS PVC Pipe Cement is a high-quality, clear, easy-to-use PVC adhesive. It’s suitable for rigid uPVC and M-PVC piping in both pressure and non-pressure applications including guttering, spouting, conduit, waste bowls, standard low-pressure pipe systems, channelling etc. Ideal for use on irrigation, plumbing, pools and spa applications etc.

The ADOS PVC Pipe Cement is easy to use, rapid drying and demonstrates fast strength development, curing to a waterproof bond. The bond is unaffected by plasticizer migration.

When applied to the pipe surface, the solvents in ADOS PVC Pipe Cement cause the uPVC to soften and swell. When two such surfaces are placed in close contact (as in a spigot and socket joint), the softened surfaces mix and on hardening produce a chemically welded joint. Pipe is usable after 24 hours. Applicator brush included in pot.

WARNING: Surfaces to be bonded should first be thoroughly cleaned before applying ADOS PVC Pipe Cement. Oil, grease, water or dust on the uPVC surface inhibit the softening. Dust or similar substances will prevent proper contact between the surfaces and a full-strength joint will not be created.

Note: ADOS PVC Pipe Cement which has thickened in the pot through evaporation of the solvents, should not be used as it will not soften the pipe surface sufficiently.

ADOS PVC Pipe Cement Features:

• General purpose
• High quality
• High bond strength
• Easy to use
• Rapid drying
• Fast strength development
• Waterproof bond
• Conforms to AS/NZ 3879 Type P
• Brushable – Applicator brush included in pot
• Uses: uPVC guttering
  Waste bowls
  Pipe systems
  Spouting
  Channelling
  Irrigation
  Plumbing
  Pools
• Conforms to AS/NZ 3879 Type P