ADOS Structural Adhesive

Superior adhesion and impact resistance

ADOS Structural Adhesive is a superior one-to-one mix adhesive that will out-perform most other adhesives. Its gap filling qualities will bridge and strengthen irregular joins. This adhesive will not slump, has high impact resistance and may be milled, tapped, screwed, sawn and painted over when cured.

Structural Adhesive is an epoxy-polyamide resin which has excellent adhesion to properly prepared timber, aluminium, steel, brick, masonry and GRP. It’s 100% water resistant and has excellent chemical and abrasion resistance, making it ideal for industrial and commercial environments.

Uses:

• Flooring: attach floor tiles, fill gaps in recesses, fill cavities in broken dowel joints, seal shower floors, join shower bases to floors and walls, timber (cedar core, diagonal planking)
• Construction: fill gaps in recesses, fill cavities in broken dowel joints, repair exterior joinery, laminate beams, fix starter bolts in place instead of concrete, repair broken concrete blocks, attach laminates and join to bench tops, cold weld wrought iron, instead of nailing, glue fibre cement board to wood

ADOS Structural Adhesive Features:

• 100% Waterproof: use in wet areas and to seal shower floors, join shower bases to floors and walls etc
• Super strong: bonds similar and dissimilar products
• Convenient and versatile: suitable for over painting, drilling, tapping, sanding, planing or sawing
• Appearance: similar shade to timbers, may be varnished over without spoiling the natural timber effect
• Resilient: 100% water resistant, excellent chemical, abrasion and high impact resistance
• Safe: non flammable
• Cost effective, easy to use: 1:1 ratio, ensures correct mixing each time

ADOS Structural Adhesive Specifications:

• Type: Epoxy Adhesive
• Composition: Epoxy and fillers
• Colour: Tan
• Temperature Range: Up to 60 degreesC
• Reactivation: N/A
• Viscosity: Thick gel
• Coverage: 1m per litre
• Working Time: 30 minutes
• Cohesive Bond Strength: 870 – 1000 kg/in
• Thinning: No thinning required
• Clean Up: ADOS Epoxy Solvent Clean Up