ADOS Structural Adhesive Hardener 10L

Epoxy Glue 1:1

ADOS Structural Adhesive is a superior one-to-one mix adhesive
that will out-perform most other adhesives. Its gap filling
qualities will bridge and strengthen irregular joins. ADOS
Structural Adhesive will not slump, has high impact resistance and
may be milled, tapped, screwed, sawn and painted over when
cured.

ADOS Structural Adhesive is an epoxy-polyamide resin which has
excellent adhesion to properly prepared timber, aluminium, steel,
brick, masonry and GRP. It is 100% water resistant and has
excellent chemical and abrasion resistance, making it ideal for
industrial and commercial environments.

Features and Benefits

• 100% Waterproof – Use in wet areas and to seal shower floors,
  join shower bases to floors and walls etc
• Super strong – Bonds similar and dissimilar products
• Convenient and versatile – Suitable for over painting,
  drilling, tapping, sanding, planing or sawing
• Appearance – Similar shade to timbers, may be varnished over
  without spoiling the natural timber effect
• Resilient – 100% water resistant, excellent chemical, abrasion
  and high impact resistance
• Safe – Non flammable
• Cost effective, easy to use – 1:1 ratio, ensures correct mixing
  each time

Uses

• Flooring – Attach floor tiles, fill gaps in recesses, fill
  cavities in broken dowel joints, seal shower floors, join shower
  bases
  to floors and walls, timber (cedar core, diagonal planking)
• Construction – Fill gaps in recesses, fill cavities in broken
  dowel joints, repair exterior joinery, laminate beams, fix
  starter
  bolts in place instead of concrete, repair broken concrete blocks,
  attach laminates and join to bench tops, cold weld
  wrought iron, instead of nailing, glue fibre cement board to
  wood

Specifications:

Tupical Properties and Characteristics

Type	Epoxy Adhesive
Composition	Epoxy and fillers
Colour	Tan
Temperature Range	Up to 60 degreesC
Reactivation	N/A
Viscosity	Thick gel
Coverage	1m per litre
Working Time	30 minutes
Cohesive Bond Strength	870 – 1000 kg/in
Thinning	No thinning required
Clean Up	ADOS Epoxy Solvent Clean Up

Note: This listing is for the ADOS
Structural Adhesive Hardener 10L only. Resin sold
separately.